Content

Content

Finish of the panels: Panels are available in plain andperforation of 2.5mm and 1.7mm.

84C/184 C ceiling system comprises of 84/184 mm x 12.5 mm panels with 23.9 mm flange roll formed out of metal coils galvanized coil coated steel or aluminium alloy. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep out of 0.7/0.9 mm Aluminium or 0.5 mm galvanized steel sheet with cutouts to hold the panels in module of 100/200 mm at maximum 1.6 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. Galvanized steel wire rod hanger with special height adjustment suspension clip at max 1.3 mm c/c. Hangers are fixed to the roof by ceiling bracket. Panels are available in lengths up to maximum 6 mm to suit site dimensions. Edge profiles or wall angles are 24 mm X 24 mm X 0.5 mm thick and match the colour of the panel.

Metal used for construction of both panels and carrier:
Aluminium Alloy AA5050, AA3105 or AA1050 is used to make the panels and carrier. Thickness is 0.5 mm for panels and 0.9/0.7 mm for carriers.
Panel are made of Galvanised steel with 180/120 gsm Zinc coating and 20 microns polyester paint coil coating sheets. Panels can be available in 50 microns polyester powder coating galvanized steel with 120/180 gsm Zinc coating or in aluminium alloy in different colours.
Finish of the panels : Panels are available in plain and perforation of 2.5mm and 1.7mm.

84R ceiling system comprises of 84 mm x 16 mm panels without flush profile (for 100 mm module only) roll formed out of metal coils. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep made out of 0.9/0.7 mm Aluminium or 0.5 mm galvanised steel sheet with cutouts to hold the panels in module of 100 mm at maximum 1.7 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.3 mm c/c. Hangers are fixed to the roof by ceiling bracket. Panels are available in max. Lengths up to maximum 6 m to suit site dimensions. Edge profiles or wall angles are 24 mm X 24 mm X 0.5 mm thick and match the colour of the panel. Flush profile can be use in between 2 panels to fill gap of 16mm.

Metal used for construction of both panels and grid: Aluminium Alloy AA5050, AA3105 or AA1050 is used to make the panels carrier. Thickness is 0.5 mm for panels and 0.9/0.7 mm for carriers. Panel are made of Galvanised steel with 180/120 gsm Zinc coating and 20 microns polyester paint coil coating sheets. Panels can be available in 50 microns polyester powder coating galvanized steel with 120/180 gsm Zinc coating or in aluminium alloy in different colours. Finish of the panels : Panels are available in plain and perforation of 2.5 mm and 1.7 mm.

150F LINEAR CEILING SYSTEMS Hi-STEEL 150F ceiling system comprises of 150 mm X 17 mm. Panels are fixed on the roll formed out of metal coils galvanized coil coated steel or aluminium alloy. carriers 34.5 mm wide X 48 mm deep out of 0.7/0.9 mm Aluminium or 0.5/0.6 mm galvanised steel with cutouts to hold the panels in module of 150 mm at maximum 1.7 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.3 mm c/c. Hangers are fixed to the roof by ceiling brackets. Panels are available in lengths up to maximum 6 m to suit site dimensions. Edge profiles or wall angles are 24 mm X 24 mm and match the colour of the panel.

Aluminium - Alloy AA5050, AA3105 or AA1050 is used to make the panels and carriers. Thickness is 0.5 mm for panels and 0.7/0.9 mm for carriers. Mild Steel - Galvanized with 180 / 120 gsm Zinc coating. Thickness is 0.5/0.6 mm for panels and 0.6/0.5 mm for carriers.

Finish of the panels: Panels are available in plain andperforation of 2.5mm and 1.7mm.

Content

Content

Finish of the panels: Panels are available in plain andperforation of 2.5mm and 1.7mm.

Content

Content

Content

Metal used for construction of both panels and carrier:

200F ceiling system comprises of 200 mm X 17 mm. Panels are fixed on the roll formed out of metal coils galvanized coil coated steel or aluminium alloy. Carriers 34.5 mm wide X 48 mm deep out of 0.9 mm Aluminium or 0.5 mm galvanised steel with cutouts to hold the panels in module of 200 mm at maximum 1.7 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia galvanized steel wire rod hanger with special height adjustment suspension clip at max 1.2 mm c/c. Hangers are fixed to the roof by ceiling brackets. Panels are available in lengths up to maximum 6 mm to suit site dimensions.

Edge profiles or wall angles are 24 mm X 24 mm and match the colour of the panel. Metal used for construction of both panels and carriers : Aluminium - Alloy AA5050, AA3105 or AA1050 is used to make the panels and carriers. Thickness is 0.6 mm for panels and 0.9 mm for carriers. Mild Steel - Galvanized with 180/120 gsm Zinc coating. Thickness is 0.5 mm for panels and 0.5 mm for carriers. Finish of the panels: Panels are available in plain and perforation of 2.5mm and 1.7mm.