Clip-in false ceiling system with steel tile (600 mm x 600 mm) is manufactured out of 0. 50 mm thick regular modified polyester coated galvanized steel (z-120/180 gms total zinc coating mass of both sides, 240 mpa yield stress). These tiles can have square or beveled edges. It is available in matt finish on the exposed side and a primer coating on the back. Optionally, they can be coil coated on the both sides in different standard color shades. Then the tile has 20-micron polyester coated finish and back coat of 5-micron alkyd primer. Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring clip-in profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0. 5 mm galvanized steel clip-in profiles of size 38 mm x 20 mm, installed at 600 mm c/c spacing to support the tiles. Suspension angles are suspended from the roof structure by G.I. ceiling brackets. They are joined to the clip-in profiles by hold-on clamps. The tiles / planks are held in place by pressure clips. In the flexible system the hanger and butterfly clip replace the suspension angle. Wall angle are of size 24 mm x 24 mm and 0. 4/0. 5 mm thick. They are made of coil coated steel or aluminum matching the color of tiles. Perforation is of 2. 5 mm dia. At 5. 5 mm c/c.

Clip-in false ceiling system with steel tile (600 mm x 600 mm) is manufactured out of 0. 50 mm thick regular modified polyester coated galvanized steel (z-120/180 gms total zinc coating mass of both sides, 240 mpa yield stress). These tiles can have square or beveled edges, the tiles with the perforated surface available in perforation of sizes 2.5 mm, 2.2 mm, 1.8 mm, 12 mm & 14 mm. It is available in matt finish on the exposed side and a primer coating on the back. Optionally, they can be coil coated on the both sides in different standard color shades. Then the tile has 20-micron polyester coated finish and back coat of 5-micron alkyd primer. Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring clip-in profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0. 5 mm galvanized steel clip-in profiles of size 38 mm x 20 mm, installed at 600 mm c/c spacing to support the tiles. Suspension angles are suspended from the roof structure by G.I. ceiling brackets. They are joined to the clip-in profiles by hold-on clamps. The tiles / planks are held in place by pressure clips. In the flexible system the hanger and butterfly clip replace the suspension angle. Wall angle are of size 24 mm x 24 mm and 0. 4/0. 5 mm thick. They are made of coil coated steel or aluminum matching the color of tiles. Perforation is of 2. 5 mm dia. At 5. 5 mm c/c.

Clip-in false Ceiling System made of Galvanized steel /Aluminium swing down tiles ( 600 mm x 600 mm) are manufactured out of 0.50 mm thick polyester coil coated steel 120 gsm zinc coating or powder coated with 50 microns polyester paint. Aluminium tiles are manufactured out of 0.70mm thick aluminium sheets with powder coated 50 microns polyester paint. These tiles can have beveled or straight edges. Coil coated galvanized steel tiles have 20 microns polyester coated finish on front side and 5 microns alkyd primer coating on back side. These swing down tiles are available in plain and perforation of 2.5 mm and 1.7 mm.

Two side of each tile are raised and piped stopped to ensure positive engagement into the spring clip-in profile, yet allow for swing down of individual tile. The rigid suspension system consists of rows of 0.50 mm galvanized steel clip-in profiles of size 38 mm x 20 mm, which are suspended and jointed from galvanized steel C Channels of size 10 mm x 38 mm x 10 mm with hold on clamps. Clip-in profiles are installed at 600 mm c/c spacing to support the swing down tiles. C Channels are 3600 mm long and spaced at 1200 mm centers and securely fixed with suspension angles. Suspension angles are suspended from the roof structure by G.I. Ceiling brackets. In the flexible system the rod hanger and butterfly clip replace the suspension angle. Wall angle or Edge Profile are of size 24 mm x 24 mm and made of 0.4 mm thick coil coated white colour sheet matching the colour of tiles.

The rigid suspension system consists of rows of 0.5 mm galvanized steel Clip-in profiles of size 38 mm X 20 mm, installed at 600 mm c/c spacing to support the tiles.

It is L shaped made of 1.2 mm thick G.I. Steel sheet in horizontal and vertical size of 40mm x 40mm with 0.4 mm thick suspension clip to adjust ceiling level.